Published: 24.10.2026 · Motohill team
You choose a flail mower (mulcher) for a mini excavator by three things: the excavator's weight, the oil flow and pressure of its hydraulics, and the mounting. If your excavator weighs 6–8 t, the Jansen BM-120, which mounts on the arm (60–100 l/min, up to 200 bar), is a good fit. If the carrier has a Euro-type mount and a 35–65 l/min circuit, consider the front-mounted HMM-130 or HMM-170. Before ordering anything, check the hydraulics data in your excavator's manual.
What does a hydraulic mulcher do on an excavator?
It is a flail mower driven by a hydraulic motor, not by a PTO or its own petrol engine. The shaft with hammers shreds grass, brush and thinner branches. On the excavator arm, the mulcher reaches slopes, ditches, embankments and places a tractor cannot enter. In the front-mounted version, you fit it to the front of the carrier and mow pastures, meadows and green areas.
How to choose a mulcher for a mini excavator
1. Excavator weight and class
The BM-120 is described for small and medium excavators of 6–8 t. That is more than a typical garden micro excavator. The Jansen MB-500 and MB-800 in our range weigh 562 and 790 kg, and their product pages give neither the oil flow of the auxiliary circuit nor any compatibility with a mulcher. So before buying a mulcher for a micro excavator, call us and ask instead of assuming it fits.
2. Oil flow and pressure
This is where most mistakes happen. The BM-120 needs 60–100 l/min at a working pressure of up to 200 bar. The HMM-130 needs 35–50 l/min at 180–200 bar, and the HMM-170 55–65 l/min at 180–200 bar. You will find the values for your excavator in its manual or on the hydraulics plate. Too little flow means the shaft turns more slowly, so the mulcher cannot reach full power.
3. Mounting and connections
The BM-120 comes with a self-levelling bracket (parallelogram linkage), but the quick coupler for the excavator must be bought separately and matched to your machine. Depending on the excavator, modifications may be needed. The hoses use LSQ-S1 3/4" quick couplings. The HMM-130 and HMM-170 have a Euro-type mount, so they fit carriers with that interface: front loaders, farm loaders, municipal vehicles and, according to the description, mini excavators with a hydraulic circuit.
4. The case drain line
All three mulchers need an oil leakage (case drain) line. Without correctly connected supply, return and drain line, the hydraulic motor will not run properly. Check that your excavator has such a port, because not every one does.
5. Width and material to be cut
The BM-120 cuts about 113 cm wide, has a Ø 128 mm shaft with 10 hammers of 1.2 kg each, and cuts grass, brush and branches up to about 3–4 cm. The front mulchers are wider (130 and 170 cm), have a double spiral Ø 110 mm shaft and suit large meadows better than slopes. Galvanised flaps at the front limit thrown stones.
Jansen mulchers compared
| Model | Mounting | Carrier | Oil flow | Pressure | Working width | Hammers | Weight |
|---|---|---|---|---|---|---|---|
| BM-120 | excavator arm, self-levelling bracket | excavator 6–8 t | 60–100 l/min | up to 200 bar | approx. 113 cm | 10 × 1.2 kg | 335 kg |
| HMM-130 | front, Euro mount | tractor from 15 HP, loaders, mini excavators | 35–50 l/min | 180–200 bar | 130 cm | 22 × approx. 350 g | 315 kg |
| HMM-170 | front, Euro mount | tractor from 20 HP, loaders, mini excavators | 55–65 l/min | 180–200 bar | 170 cm | 28 × approx. 350 g | 355 kg |
Other earthmoving machines are in the excavators and loaders section, and mowers for tractors and quads are in the flail mowers section.
Common mistakes when buying
- Buying without checking the hydraulics. Flow, pressure and the drain line must suit the mulcher, not the other way round.
- Assuming the quick coupler is included. With the BM-120 it is not, and matching it to the excavator can be time-consuming.
- Choosing by catalogue weight rather than your own excavator. A machine that is too light with a heavy mulcher on the boom loses stability.
- Cutting branches that are too thick. The BM-120 cuts branches up to about 3–4 cm, thicker ones need a different tool.
- Skipping a site check. Stones, wire and fence remains damage the hammers and are thrown out, so walk the slope before mowing.
Safe operation and when to choose other equipment
The mulcher shaft turns at high speed, so make sure nobody is nearby before starting. Before work, check hoses and couplings for leaks and the hammers for wear, and afterwards clean grass from the housing and lubricate the points as the manual says. Remember that a front mulcher needs one double-acting hydraulic connection. If you have a large, flat area to cut and a tractor with a PTO, an ordinary PTO flail mower may be a simpler and cheaper option to run. A hydraulic mulcher wins where arm reach matters: on slopes, in ditches and in hard-to-reach places.
Delivery and first start-up
Jansen machines arrive in a wooden crate, and you do part of the assembly yourself. For the HMM-130 and HMM-170, allow about 1–2 hours for final assembly. The mulchers come with a manual in German. Before first use, check the oil level in the hydraulic system of the excavator or tractor and make sure all connections are tight. On receipt, check that the shipment is complete and free of transport damage.
Frequently asked questions
Which mulcher fits a 6–8 t excavator?
The Jansen BM-120, mounted on the arm. It needs a flow of 60–100 l/min, pressure up to 200 bar and a case drain line.
Is the quick coupler for the excavator included?
No. The BM-120 comes with a self-levelling bracket, and you buy the quick coupler separately and match it to your excavator.
Does the mulcher need a case drain line?
Yes. Without correctly connected supply, return and drain hose, the hydraulic motor does not run properly.
Will a mulcher fit the MB-500 or MB-800 micro excavator?
The product pages of these machines give no compatibility data for a mulcher. Before you decide, call +48 780 140 444 and we will check the data with you.
What about delivery, warranty and returns?
We ship by courier across Poland, free from 999 zł (39 zł below that). The warranty is 24 months, returns are possible within 14 days, and return shipping is paid by the buyer. Delivery to other EU countries is possible, with cost and time confirmed when you order.