|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
The Jansen HMM-130 is a front-mounted flail mower with hydraulic drive. It maintains pastures, meadows, lawns and green areas with grass, shrubs and smaller branches. Thanks to its Euro-style mounting it fits not only tractors but also farm loaders, mini excavators and municipal vehicles.
Uses and advantages
Working width is 130 cm. A double spiral shaft of 110 mm diameter with 22 hammers of about 350 g each runs quietly and shreds even very tall grass and brushy or straw-like material. Three covered V-belts transmit the drive and protect the machine from overload.
A heavy trailing roller (Ø 100 mm) allows cutting height to be adjusted with the side skids. Freely swinging galvanised strips at the front stop stones from being thrown out.
Specifications
- Drive: hydraulic, 3 V-belts
- Working width: 130 cm
- Overall width: 140 cm
- Housing height: 60 cm
- Hammers: 22 pcs, approx. 350 g
- Flail shaft: double spiral, Ø 110 mm
- Rear roller: Ø 100 mm
- Required tractor power: from 15 HP
- Required oil flow: 35–50 l/min
- Working pressure: 180–200 bar
- Weight: 315 kg
- Weight with packaging: 345 kg
- Packaging dimensions: 155 × 84 × 81 cm
Compatibility
Euro-type front loaders and vehicles with a hydraulic circuit (tractors from 15 HP, farm loaders, mini excavators, municipal vehicles).
Please note: delivery and first start
- The machine is delivered in a wooden crate and needs final assembly before first use.
- Allow about 1–2 hours for final assembly.
- A German-language operating manual is included.
- The carrier vehicle needs one double-acting hydraulic connection and a case-drain (leak oil) line (required: 35–50 l/min at 180–200 bar). Without correctly connected supply, return and case-drain line the hydraulic motor will not run properly.
- On delivery, check that the shipment is complete, matches your order and shows no visible transport damage.
See also: Flail mowers, Mowers and mulchers.


