|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
The Jansen HS-20DS63E double (two-way) splitter is a small revolution among wood splitters. Because this machine works in both directions (both forward and reverse!), you work twice as fast! There is no more "empty" return and fuel consumption is also much more efficient! It has an actual splitting force of 20 tons in the forward line (17 tons in the return line) and a powerful 2.2 kW electric motor.
The splitting pressure of our splitters is measured directly on the splitter, so this information also corresponds to the actual splitting pressure. Many other suppliers quote unrealistic values that are never achieved in practice.
Thanks to the horizontal structure, the wood is always at working height. The hydraulics are very fast. The full feed phase takes only 7 seconds. The length of the split piece can be up to 60 cm. The splitter is extremely easy to use. Thanks to the electric engine, the noise level is much lower than in the petrol version.
The set includes a cross wedge that simply attaches to the splitting wedge. Switching between wedge and cross is done in seconds! The length of the splitting wedge is approx. 20 cm and the cross wedge is 20 cm, and the height is 15 cm.
The Jansen HS-20DS63E can be easily towed to the job site using the ball hitch. The device is not approved for transport on public roads. Due to its small overall width (approx. 102 cm), the device can also be transported on a regular trailer.
ATTENTION:
The device is delivered well packed and disassembled in a wooden box. Final assembly will take approximately 3-4 hours. The scope of delivery includes an operating manual in German. Assembly is usually easy, but may require two people to do the job as the individual parts are heavy! The first filling of the device requires approximately 15 liters of HLP46 hydraulic oil.
Packaging dimensions: 133x80x59 cm (L x W x H), weight incl. packaging: 210 kg.
Please note: delivery and commissioning
- The machine is delivered disassembled in a wooden crate and must be assembled before first use.
- Allow about 3–4 hours for final assembly.
- Because some parts are heavy, assembly should be done by at least two people.
- An operating manual in German is included.
- Before first use, the hydraulic system must be filled with approx. 15 litres of HLP46 hydraulic oil.
- The splitter has no road approval and must not be towed on public roads. Load it onto a trailer for transport.
- On receipt, check that the delivery is complete, matches your order and shows no visible transport damage.