|
Quantity
|
Out of stock
|
||
|
|
|||
Thanks to its quiet operation and clean cutting profile, our Tractor Hedge Cutter Jansen THS-180 is ideally suited to the regular maintenance of hedges and bushes in private, municipal and agricultural areas. Depending on the condition of the wood and quantity to be cut, the robust knife blades can detach branches with a diameter of max. 3cm as well as very thin branches.
This hedge cutter can be fitted to tractors, compact tractors, yard loaders as well as wheel loaders and front loaders using Euro adaptors. The cutting device is powered through the tractor’s hydraulic system. It also has an additional pallet fork attachment and can therefore be used even more flexibly.
The cutter bar has an effective working width of 180cm and weighs approximately 270kg. The cutting saw is hydraulically powered and can be mounted on a wheel loader, telescopic handler or a tractor front loader. The boom can be mechanically extended sideways by around 80cm and adjusted horizontally to suit the particular cutting situation. The counterweight mounted on the side has a minimal vibration effect on the carrier vehicle, even when the Hedge Cutter is fully extended. Required hydraulic connectors on the carrier vehicle: 1x dual-purpose.
You will also require a 12 volt connection for the electromagnetic control valve. Expand the range of uses and mount our optionally available Jansen AS-400K branch saw on the base frame of the THS-180. With the Jansen AS-400K branch saw, you can easily cut through branches up to 80 mm thick in seconds. The AS-400K features smooth running and a very clean cut pattern, making it excellent for pruning bushes and also trees.
ATTENTION: The device is delivered well packed and part-assembled in a wooden crate. You should allow approx. 2-3 hours for final assembly. Instructions for use in German are included in the scope of delivery. The assembly is relatively simple and does not require specialist knowledge. In the event that you require any assistance, we are happy to help you. Important note cutter bar: Please ensure that you do not operate the cutter bar at too high a speed, otherwise the connecting rod may be damage









